Showing all 7 results

MODERN/PHOEBUS PBM-GEVS500A Vertical & Horizontal Milling Machine

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

TRAVEL

  • Longitudinal travel – X manual 1120 mm
  • Cross travel – Y manual 380 mm
  • Vertical travel – Z manual 450 mm
  • Longitudinal travel – X Auto 920 mm
  • Cross travel – Y Auto 500 mm
  • Vertical travel – Z Auto 420 mm

MODERN/LINMAC MD-930 Inverter Mill/Drill

2HP – 3PH – 220V – 60HZ

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

  • Drilling Capacity
  • Steel: 32 mm / 1-1/4”
  • Tapping Capacity: 19 mm / 3/4″
  • Swing: 465 mm / 18.3”
  • Spindle Taper: R8
  • Spindle Travel: 150 mm / 6”
  • Quill Diameter: 75 mm / 3”

MODERN 935VS-1 Milling Machine

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

  • Motor 3 HP, 1 Ph, 220 Volt, 60 Hz
  • Variable Speed 210 – 3200 RPM
  • Quill 85 mm
  • Work Table 9” x 35”
  • Accuracy of Travels 0.02mm
  • Accuracy of Table (perpendicularity) 0.01mm
  • Longitudinal Travel (X-Axis) 21”
  • Cross Travel (Y-Axis) 12”
  • Vertical Travel (Z-Axis) 15.5”
  • Weight 1,320 lbs

MODERN 3VM Milling Machine

3 HP, 1 Ph, 220 Volt, 60 Hz, Special Table: 10” x 50”, c/w Chip Tray, (ETL Certified)

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

  • Table: – 10″ x 50″
  • Table T-Slots: – 3″ x 5/8″
  • X/Y/Z Axis Travel: – 36″/15″/16″
  • Spindle Quill Travel: – 5″
  • Spindle Feedrate: – .0015″/.003″/.006″/rev
  • Spindle Taper: – R-8
  • Spindle Motor: – 3HP
  • Spindle Center to Column Surface: – 6-3/4″  29-3/4″
  • Spindle Nose to Table Surface: – 0″  18-1/2″
  • Head Swivel 45 deg. Tilt: – Forward & Backward
  • Head Swivel 90 deg. Swivel: – Right & Left
  • Ram Travel: – 20″
  • Spindle Speed (R.P.M.) Vari-Speed: – 70 ” 4200 RPM
  • Machine Weight: – 2,200 Lbs.

ELUMATEC KF 78 Two Spindle Copy Router

Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.

 FEATURES:

  • 240-575 Volt, 60 Hz, 3 Ph electrics
  • 1.0 Horsepower motors
  • Router spindle speed of 12,000 RPM
  • Horizontal routing capacity with length stop of 300x100mm (11.81 x 3.94 in.)
  • Horizontal routing capacity with copying template 270x70mm (10.63 x 2.76 in.)
  • Horizontal stroke 80mm (3.15)
  • Vertical routing capacity with length stop of 290×100 (11.42×3.94 in.)
  • Vertical routing capacity with copying template 230x70mm (90.05 x 2.76 in.)
  • Vertical stroke 120mm (4.72 in.)

ELUMATEC AF 221 End Milling Machine

Machines manufactured by elumatec are only put on the market if they meet our high standards in terms of reliability, efficiency, and accuracy.

FEATURES:

  • 240-575 Volt, 60 Hz, 3 Ph Electrics (please specify)
  • 2.7 HP Drive Motor
  • Horizontal Pneumatic Clamp
  • Vertical Pneumatic Clamp
  • Working range up to 250mm (9.85 in) wide
  • Depth distance stop for four different notch depths
  • Adjustable stop fence, can be swiveled left or right up to 60°
  • Positive pin location for 90° milling
  • Fast tool change through a spindle lock
  • Totally enclosed cutter set using a safety hood

ACCUTECH 2500M Knee Type Milling Machine

Universal Milling Machine. Accutech Machine recognizes and emphasizes the importance of the objective of reducing part variability through continuously improving and maintaining the quality of the product.

 FEATURES:
  • Rapid traverse on “X”, “Y” & “Z” axis.
  • Via inverter variable feeding on “X”, “Y” & “Z” axis.
  • High quality meehanite casting body GC-45/DIN-40.
  • All gears & shafts are hardened & ground.
  • Table swivels 45 degrees left & right.
  • All “X”, “Y” & “Z” wider square slide ways & table surface are hardened & ground.
  • Motorized ARM/RAM elec. Motor is 3.75KW (5.5HP)
  • Horizontal spindle elec. Motor is 5.5KW (7.5HP)
  • All square slide way & dovetail way are bigger & stronger.
  • Cast iron is either ASTM No. 40/meehanite GC-45 or DIN GG-40.