Showing 1–16 of 188 results

USED RAS SERIES 74 CNC UP/DOWN FOLDING MACHINE

SPECIFICATIONS

Max. Forming Capacity at Full Length, Mild Steel 9 gauge

Max. Length of Forming 126″

Smallest Permissible Inner Bend Radius, (Full Width) 1.25 x gauge

Min. Flange Height 6 x gauge

Clamping Beam Max. Speed Up 3.60″/sec

Clamping Beam Max. Speed Down 1.57″/sec

Max. Folding Speed 74″/sec

Folding Angle Setting Range 0-180 degree

CNC Folding Beam Stroke 3.15″

CNC Lower Beam Stroke 3.15″

Clamping Beam Stroke 15.75″

Backgauge Positioning Accuracy +/- 0.004

Backgauge Max. Positioning Time 3 sec

Backgauge Min. Position 0.394″

Backgauge Max. Position (w/L-shape backgauge) 120″

Request a Quote

MODERN/MASCUT AC-2140 TEACH-IN CNC LATHE

DESCRIPTION
• Spindle auto speed shifting (3 steps) and CNC controlling.
• All casting are made of high tensile Meehanite cast iron which are annealed treatment to eliminate internal residual stress.
•Wide bed and box constructed, bed ways are high frequency heat treated, precision ground etc., to provide stability at high speed running or deep cut.
• Spindle & gear are made of CR-MO alloy steel which are carburizing & precisely ground, forced lubricating & oil bathed combined in headstock which can be prolonged servicing life.
• Three point support on the spindle with two taper roller bearings and one roller bearing to assure the accuracy & rigidity.
• High precision ball screw.
• CNC & Manual operation
• Tool radius & geometry compensation
• Constant surface speed for model with infinitive variable speed
• 8 bit bus, 32K RAM
• Serial port (RS-232 communication)
• Teach-in mode
• Semiautomatic, automatic (Cycle) and part program modes
• Rapid travels

Request a Quote

Used MultiCam 6000 Series Plasma Table

Specifications

Plasma table

Power unit
Hypertherm HPR400XD With cooler
Built 2012
600V 3PH 88A 60Hz

Control
Multicam 6000 series with EZ control
Nesting software sigmanest
Built 2012
208V 3PH 26A 50-60Hz

Tower
96” X 480” Y
2” torch height

Table
96” x 480”
Water filled table
Horizontal slats
Pneumatic raise and lowering for height control

 

Request a Quote

ACCURSHEAR MODEL 850012 HYDRAULIC SHEAR

SPECIFICATIONS:

 

Capacity:                                             1/2″ x 12′ mild steel

Maximum cutting length:                  144″

Knife Size:                                           1”x 4”

Knife Length:                                      148”

Hold down Tonnage:                          30 t

Cycles per minute:                              9 full – 35 short

Number of hydraulic hold downs:    19

Distance under hold downs:              1/2″

Working height:                                  34″

Motor:                                                  40 HP

Volts:                                                    575 3PH

Phase:                                                   3

Cycles:                                                  60

Approximate dimensions:                  174″ l x 99″d x 99″ high

Approximate weight:                          35,000 lbs.

Request a Quote