Showing 1–16 of 44 results

“USED” DURMA DCB-S 800 Double Column Semi-Automatic Bandsaw

Click to view:

DCB-S-800-Brochure

DURMA’s 65 years of experience translates into product quality, innovative solutions, proactive approach and customer service excellence.

STANDARD EQUIPMENT:

  • Two-way 45° Angle Adjustable Clamp
  • Hydraulic Vice
  • Electronic Variable Cutting Speed Adjustment with Inverter
  • Bimetal Bandsaw and Cooling System
  • Blade Tensioning – Hydro Mechanical
  • Bearing and Carbide Tape Blade Housing
  • Cutting Height Adjustment
  • Chip Brush
  • Motorized Roller Feeding
Request a Quote

“USED” SHARP UNION MODEL 1/2 127 HYDRAULIC SHEAR

STANDARD FEATURES:

  • Front controlled motorized retractable back gauge with digital readout.
  • Heavy duty squaring arms with stainless steel scales and disappearing stops
  • Electronic stroke length adjustment
  • Triple row ball transfers on table
  • Urethane removable anti-marring feet for hold downs
  • Automatic counter control
Request a Quote

“USED” HYD-MECH S-20 Series II Band Saw

http://http://www.hydmech.com/dealers/sm/SSeriesManuals/393290_S20%20Series%20II_2001.pdf

The S-20 manual band saw features a swing head design and provides exceptional miter cutting capability for light to medium duty applications.

Featuring a 13″H x 18″W capacity at 90°, 2 HP motor, and 1″ blade, the S-20 is a versatile machine ideal for use in tight working spaces.

SPECIFICATIONS:

  • Capacity at 90°: Rectangular 13″ x 18″
  • Round 13″
  • Blade Size: 1″
  • HP: 2 HP
  • Operation: Manual
  • Mitering: 60° left
  • 575 Volt
  • 60 hz
  • 3 phase
Request a Quote

“USED” MVD A 02 3060 Mechanical Guillotine Shear

SPECIFICATIONS:

  • Rigid welded monoblock frame
  • Front support arms with scale, T channels and flip stops
  • NC controlled 750mm travel back gauge
  • 2 upper blade edges, 4 lower blade edges
  • Adjustable blade gap
  • Front support arms and table rollers
  • Finger protection guard
  • Mechanical sheet hold down
  • Rear safety light curtain
  • Shadow, illuminated cutting line
  • Back side protection covers
  • Cut counter
  • Pneumatic sheet support and sliding system
  • Front sheet return
  • Cutting angle: 1°30′
Request a Quote

“Used” Sertom RIMI 4RP 10-30 4 Roll Plate Rolls

SPECIFICATIONS:

  • Upper and pinch roll diameters: 10 3/4″
  •  Lateral bending roll diameter: 9″
  •  Installed power: 15 HP
  •  Wired for: 3 phase 480 volts 60 hz
  •  Machine overall length: 203”
  •  Machine overall width: 60”
  •  Machine overall height: 69”
  •  Machine maximum weight: 10,000 lbs approximate
Request a Quote

“Used” Peerless VB-1820XL Semi Automatic Vertical Tilt Frame Band Saw

Description: The VB-1820XL is the most versatile, metal cutting vertical tilt frame band saw machine on the market and designed to meet a wide span of applications.  It is a hydraulic, semi-automatic saw on which the saw bow automatically returns after the cut is completed.  This means that the operator need not expend time and energy to hand-crank the machine return as with old-fashioned designs.  It has the capability of miter cutting up to 60 degrees both left and right of center. The base and saw column are made from heavy duty, high strength structural materials to dampen vibration and provide smooth, rapid cuts.

Request a Quote

HYDMECH V-18 Semi Automatic Vertical Band Saw

Click to Download Brochure:

The V-18 is a semi-automatic vertical band saw with the ability to miter from 45° left to 45° right.

A 2 HP driven hydraulic pump supplies system pressure through three position directional valves controlling all vising, head advance/retract, blade tension, and guide arm movement.

Featuring a 20″ H x 18″ W capacity, 7.5 HP motor, and 1 1/4″ blade, the V-18 is a reliable choice for all your vertical metal cutting applications.

Request a Quote

REFURBISHED 10FT 14GA PF-1014 S Folder

Remanufactured Equipment

Regardless of the size or scope of work, Roper Whitney’s equipment remanufacturing solutions will provide value for machine owners dealing with “end-of-life” worn equipment, obsolescence, reliability and productivity issues. Remanufactured machines are a cost-effective solution for increasing performance and improving quality, providing safety upgrades and reducing maintenance and down-time.

Request a Quote
lathe

“USED” CHALLENGER BNC-2280XL TECH-IN CNC LATHE C/W FAGOR 8055 TC CONTROL

MICROCUT Challenger CNC teach-in lathe is high precision machine with latest 8055TC A type control system & AC drivers.  Machines are available to fit option turret, Hydraulic chuck, bar feeder, hydraulic tailstock quill, chip conveyor……etc.  With the high efficiency equipment fitted onto machine, it becomes a powerful machine for production.

Request a Quote

USED LOCKFORMER MODEL 20 ROLLFORMER

SPECIFICATIONS:

  • 20 – 26 ga Cap.
  • 5/16” Pocket Depth
  • Uses Approx 1” of material
  • 25 FPM
  • 3/4 HP, 115 Volt, 60 Hz, 1 Ph Motor
  • Arc-welded steel, heavy top plate, metallic blue finish stand
  • 48” L x 24” W x 42” H
  • 320lb approx shipping weight

COMPLETE WITH:

  • Acme Lock Rolls OR Drive Cleat
  • Flanging attachment
Request a Quote
hydmech

USED HYDMECH MODEL H-18A DUAL POST HYDRAULIC BANDSAW

SPECIFICATIONS:

  • Blade Size: 1 1/2” x 19’2”
  • Blade Drive: 10 HP 220/440/575 VOLT
  • Blade Speed: 50-350 SFM
  • Hydraulic Drive: 3 HP
  • Hydraulic Tank Capacity: 9.5 US GAL.
  • Coolant Tank Capacity: 30 US GAL.
  • Shuttle Stroke: 0 -34” multi-indexing standard
  • Vise Control: Hydraulic
  • Table Height: 31”
  • Machine Weight:: 8,500 lbs
  • Dimensions (w x l x h): 127” x 88” x 92”
Request a Quote