Showing all 14 results

USED LOCKFORMER MODEL 20 ROLLFORMER

SPECIFICATIONS:

  • 20 – 26 ga Cap.
  • 5/16” Pocket Depth
  • Uses Approx 1” of material
  • 25 FPM
  • 3/4 HP, 115 Volt, 60 Hz, 1 Ph Motor
  • Arc-welded steel, heavy top plate, metallic blue finish stand
  • 48” L x 24” W x 42” H
  • 320lb approx shipping weight

COMPLETE WITH:

  • Acme Lock Rolls OR Drive Cleat
  • Flanging attachment
Request a Quote
NEW FAMAR MODEL Q414 30 2 4 ROLL DOUBLE PINCH PLATE ROLL

FAMAR MODEL Q414-30/2 4 ROLL DOUBLE PINCH PLATE ROLLS

SPECIFICATIONS:

  • Upper and pinch roll diameters: 6.3”
  •  Lateral bending roll diameter: 6.3”
  •  Rotation/production velocity: 12 fpm
  •  Installed power: 4.0 HP + 1.5 HP
  •  Wired for: 3 phase 220 volts 60 hz
  •  Machine overall length: 165”
  •  Machine overall width: 40”
  •  Machine overall height: 51”
  •  Machine maximum weight: 6,490 lbs approximate
Request a Quote
MODERN MODEL #R-0535H INITIAL PINCH PLATE BENDING ROLL

MODERN MODEL #R-0535H INITIAL PINCH PLATE BENDING ROLL

STANDARD FEATURES:

  • All 3 rolls hydraulic driven
  • Pinch roll cylinder adjustment synchronously
  • All rolls made of top grade alloy steel, hardened to HRC55
  • Rigid construction for precise and smooth operation and long life time usage
  • Top swivel out to allow part to be removed
  • Forward/reverse foot switch
Request a Quote

MODERN/LINMAC RH-0806 Hydraulic Double Pinch Plate Bending Roll

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

FEATURES:

  • Hydraulic circuits which are protected against overload are fully enclosed to provide a low noise, leak proof flow system.
  • All 3 rolls rotation are driven independently & hydraulically
  • Hydraulic pinch adjustment for each lower roll
  • Each lower roll is equipped with an easy read LED indicator to show it’s reference position for operator
  • Hydraulic pinch adjustment can be easily adjusted from the led indicator reading
Request a Quote

MODERN/LINMAC L-20 LOCK FORMING MACHINE

LOCK FORMING MACHINE C/W DRIVE CLEAT ROLLS & FLANGER

SPECIFICATIONS:

  • Capacity: 20-28ga Flanging Attachment
  • Capacity: 22-28ga Drive Cleat
  • Capacity: 20 ga.Pittsburgh Uses approx. 1” of material
  • Depth of Pocket: 5/16” (8 mm) Width of hammer over edge adjustable up to 3/8” (9.5mm)
  • Speed: 25 feet per minute
  • Motor: 1 HP, 3 Phase A.C. Motor. Manual switch.
  • Drive: V-belt
  • Stand: ARC welded steel. Heavy top plate.
Request a Quote

LOCKFORMER MODEL 20 GA. PITTSBURGH ROLLFORMER

  • Equipped with Acme Lock Rolls
  • Auto Guide Power Flanging Attachment
  • 20 – 26 ga Capacity
  • 3/8″ seam
  • Uses Approx 1″ of material
  • 25 FPM
  • 3/4 HP, 110 Volt, 60 Hz, 1 Ph Motor
  • Arc-welded steel, heavy top plate
  • 36″ L x 17″ W x 42″ H
  • 290lb approx shipping weight
Request a Quote

LOCKFORMER 20 Pittsburgh Super Speed

In 1937, we introduced the first truly practical lock forming machine. It significantly cut the time required for making duct and it completely revolutionized the sheet metal working industry.

MACHINE: Pittsburgh Lock Model 20

CAPACITY: 20-26 Gauge Uses approximately 1″ of material

DEPTH OF POCKET/SIZE: 5/16″, Width of hammer-over edge adjustable up to 3/8″, Extended shafts for mounting auxiliary rolls

SPEED:  25 feet per minute

****************************************
MACHINE: Pittsburgh Lock Model 20 Super Speed

CAPACITY:  20-26 Gauge Uses approximately 1″ of material

DEPTH OF POCKET/SIZE: 5/16″, Width of hammer-over edge adjustable up to 3/8″, Extended shafts for mounting auxiliary rolls

SPEED: 75 feet per minute

Request a Quote

FLAGLER High Speed Quadformer Button Lock Rollformer

The Flagler Corporation provides the experience and technical support to meet the roll forming equipment needs of their customers.

Features:

  • Standard with re info rced “S” Cleat & 1 1/8″ Drive Cleat Tooling in the center position. There are (2) sets of extended shafts for auxiliary rolls
  • Speed: Approx. 100 feet per minute.
  • Motor: 5 HP 230/460/3/60/1800 RPM .
  • Drive: Double Vee Belt.
  • Base: Arc Welded Steel. Heavy top plate.
  • Dimensions: 68″ long, 27″ wide, 48″ high,
  • Shipping Weight: Approximately 1200 pounds
Request a Quote

FLAGLER 20GA Pittsburgh Rollformer

Used 20ga Pittsburgh

SPECIFICATIONS:

  • Capacity: 20 ga.
  • Depth of Pocket: 5/16″ width, on built-in Pittsburgh
  • Lock rolls, w/hammer over edge
  • Adjustable
  • Extended shafts: for standard auxiliary rolls
  • Drive cleat rolls optional
  • Speed: Approx. 23″ per minute
  • Motor: 3/4 HP, 115 Volt, 1 Ph, 60 Hz 1800 RPM
  • Drive Belt: V-belt
  • Base: Arc-welded steel, heavy top plate
  • Dimensions:36″ L x 16-1/2″ W x 37″H
  • Approx. shipping weight: 350 lbs.
Request a Quote

FLAGLER “S” Cleat

The Flagler Corporation provides the experience and technical support to meet the roll forming equipment needs of their customers.

Specifications:

  • Standard with Boot Cleat Tooling in the center position. There are (2) sets of extended shafts for optional tooling.
  • Speed: Approx. 100 feet per minute.
  • Motor: 5 HP 230/460/3/60/1800 RPM .
  • Drive: Double Matched Vee Belt.
  • Base: Arc Welded Steel. Heavy top plate.
  • Dimensions: 68″ long, 24″ wide, 48″ high.
  • Shipping Weight: Approximately 1050 pounds.
Request a Quote

DURMA HRB-3 2010 Motorized 3 Roll Bending Machine

Durma USA and its technical and sales support unit, SCA Fabtool Corporation, has served and supported the US metal fabrication industry since 1983.

FEATURES:

  • Flexible Roller especially for medium thick plate
  • Wide working range
  • Good value for precision and reliability
  • All three (3) rolls are driven with superior roll torque and speed
Request a Quote