Showing 17–32 of 37 results

FALLS PRODUCT MODEL 121 DEBURRING MACHINE

FALLS PRODUCT MODEL 121 DEBURRING MACHINE

Specifications:

  • Capacity: Thickness 24 gauge to 1/4″. Width 1/2″ to 4′ or more. Length 4″ to 10′ or more
  • Material: Steel, stainless steel, aluminum, brass, galvanized, perforated sheet metal
  • Electrics: 115/1/60
  • SPEED- 60 FPM
  • WEIGHT-500lbs-approximate
  • Dimensions: Height 48″, Width 48″, Depth 27″
Request a Quote
TECNA MODEL 4603 20KVA PNEUMATIC ROCKER SPOTWELDER

TECNA MODEL 4603 20KVA PNEUMATIC ROCKER SPOTWELDER

TECNA spot welders are designed to meet every need of spot welding. The new stationary ergonomic frame designed by TECNA helps to facilitate the operator’s work. The control unit has been positioned frontally to allow the operator to view the welding data even during the working cycle. The pneumatic commands and the compressed air pressure gauge have been placed at the top for easier adjustment and reading

Request a Quote
ALLSTEEL MODEL 65-8 HYDRO MECHANICAL PRESS BRAKE

USED ALLSTEEL MODEL 65-8 HYDRO MECHANICAL PRESS BRAKE

STANDARD FEATURES:

  • ALLSTEEL machines are furnished with complete electrics, motor, overload protected motor starter and foot switch remote control or palm button station.
  • Die rail with groove, die retainer screws, sectional spring open die clamps and hardened clamping bolts.
  • Limit switches with micrometer bottoming adjustment.
  • Infinitely variable pressing speed.
  • Complete overload protection:  no jamming or damage caused by bottoming.
  • OFF/SET/JOG/RUN/SINGLE/ mode selector switch.
  • Die rail centering clamp blocks.
  • Extra long ram guides with adjustment screws for back to front and left to right adjustments, increases accuracy and machine life.
  • Hardened and ground ways.
  • Ram guides lined with a non-metallic oil impregnated material:  providing long lasting score proof sliding surfaces.
  • Bed Tilt adjustment.
Request a Quote

WHITNEY 455 Notcher & Bender

No. 455 is a combination shear, notcher, and bender. It consists of a No. 51 angle iron bender, a No. 50 angle iron notcher, and a No. 4 angle iron shear, all mounted on a sturdy floor stand. It includes a 72″ operating bar handle that fits all of the tools. Ideal for mobile installation crews, maintenance shops, model shops.

c/w Stand

Features:

  • Height 33″ (838.2 MM)
  • Max. capacity 2″ x 2″ x 1/4″
  • Floor space 21 1/2″ x 26″
  • Angle Iron Bender No. 51

The No. 51 angle iron bender will bend all sizes of angle iron within the rated capacity as well as flat bars. It includes a 32″ operating bar handle.

Request a Quote

MODERN Y-16 Hand Corner Notcher C/W Floor Stand

FEATURES:

  • The notcher provides a variety of special capabilities: notching, box forming, dovetailing, coping and corner shearing: for sheet metal, angle iron and flat stock.
  • Hand operated
  • Floor mounted
  • Adjustable gauge stops
  • Replaceable blades
  • Finger guards
  • This handy tool; operating on heavy duty bearings, trim, notch and cope up to 16 gauge sheet metal
  • The shear has adjustable blades, duplicate scales, adjustable gauge stop, and finger guard. Both the upper and the lower blades are replaceable.
Request a Quote

LOCKFORMER 20 Pittsburgh Super Speed

In 1937, we introduced the first truly practical lock forming machine. It significantly cut the time required for making duct and it completely revolutionized the sheet metal working industry.

MACHINE: Pittsburgh Lock Model 20

CAPACITY: 20-26 Gauge Uses approximately 1″ of material

DEPTH OF POCKET/SIZE: 5/16″, Width of hammer-over edge adjustable up to 3/8″, Extended shafts for mounting auxiliary rolls

SPEED:  25 feet per minute

****************************************
MACHINE: Pittsburgh Lock Model 20 Super Speed

CAPACITY:  20-26 Gauge Uses approximately 1″ of material

DEPTH OF POCKET/SIZE: 5/16″, Width of hammer-over edge adjustable up to 3/8″, Extended shafts for mounting auxiliary rolls

SPEED: 75 feet per minute

Request a Quote

KING Arbor Press

3 ton, Precision cut steel rams and pinions for accurate operationComplete with 4 position anvil

  • Capacity – 3 ton
  • Diameter of work – 12 1/2”
  • Capacity over table – 12”
  • Dimensions (LxWxH) – 17 1/2” x 10 1/2” x 24”
  • Weight – 140 lbs
Request a Quote