Showing 1–16 of 57 results

Placeholder

MODERN TF-1100S RADIAL ARM DRILL

SPECIFICATIONS:

  • Drilling: 5 degree
    • Steel: 2″
  • Cast Iron: 2″ 3/8”
  • Tapping:
    • Steel: 3/4″
  • Cast Iron: 1-3/8″
  • Boring:
    • Steel: 3″ ½”
  • Cast Iron: 4-3/4″
  • Spindle Stroke: 9-7/8″
  • Size of Morse Taper: No. 4
  • Spindle Speed: 44-1500 (6)
  • Spindle Feeds: 0.05″, 0.09″, 0.15″
  • Column Diameter: 11-5/8″
  • Max. Distance, Column Surface Spindle Center: 45″
  • Min. Distance, Column Surface Spindle Center: 13″
  • Horizontal Travel of Headstock: 31″
  • Max. Distance, Base to Spindle: 48-1/2″
  • Min. Distance, Base to Spindle: 21-1/4″
  • Overall Height of Column: 85″
  • Machine Height From Floor: 101″
  • Dimensions of Base: 1800 x 800 x 170, 20” x 31” x 66”
  • Effective Area of Table: 650 x 500 x 410 , 25” x 20” x 16.4”
  • Spindle Drive Motor: 3HP
  • Arm Elevation Motor (HP): 2HP
  • Coolant Pump: 1/8HP
  • Weight: 1270kgs.
  • Measurement (LxWxH): 79″ x 40″x88″
Request a Quote
LINMAC MODEL DG 675 DRILL BIT GRINDER
Read more

LINMAC MODEL DG 675 DRILL BIT GRINDER

SPECIFICATIONS

  • Capacity 6 to 75 mm (1/4”-3”)
  • Motor ½ hp, 1 ph 110V 50/60 Hz
  • Grinding speed 1740 rpm
  • Machine dimension 850 x 520 x350 mm (33-1/2” x20-1/2” x14”)
  • Packing dimension 895 x 575 x 660mm (35”x23”x26”)
  • Machine weight 30.2 kg (66.4lb) / 44.9 kg (98.8lb) (nw/gw)

MODERN/MASCUT AC-2140 TEACH-IN CNC LATHE

DESCRIPTION
• Spindle auto speed shifting (3 steps) and CNC controlling.
• All casting are made of high tensile Meehanite cast iron which are annealed treatment to eliminate internal residual stress.
•Wide bed and box constructed, bed ways are high frequency heat treated, precision ground etc., to provide stability at high speed running or deep cut.
• Spindle & gear are made of CR-MO alloy steel which are carburizing & precisely ground, forced lubricating & oil bathed combined in headstock which can be prolonged servicing life.
• Three point support on the spindle with two taper roller bearings and one roller bearing to assure the accuracy & rigidity.
• High precision ball screw.
• CNC & Manual operation
• Tool radius & geometry compensation
• Constant surface speed for model with infinitive variable speed
• 8 bit bus, 32K RAM
• Serial port (RS-232 communication)
• Teach-in mode
• Semiautomatic, automatic (Cycle) and part program modes
• Rapid travels

Request a Quote
MODERN MODEL #R-0535H INITIAL PINCH PLATE BENDING ROLL

MODERN MODEL #R-0535H INITIAL PINCH PLATE BENDING ROLL

STANDARD FEATURES:

  • All 3 rolls hydraulic driven
  • Pinch roll cylinder adjustment synchronously
  • All rolls made of top grade alloy steel, hardened to HRC55
  • Rigid construction for precise and smooth operation and long life time usage
  • Top swivel out to allow part to be removed
  • Forward/reverse foot switch
Request a Quote

MODERN/WAYTRAIN UE-712SG Horizontal Bandsaw

1 Horse-Power, 1 Phase, 120/240 Volt, 60 Hertz

SPECIFICATIONS:

  • Type: Swivel Head and Gear Transmission
  • Motor: 1 Horse-Power
  • Voltage: 110/220 Volt
  • Blade Speed: 39/66/82 MPM (125/215/270 FPM)
  • Blade Size: 19 x 0.9 x 2360mm
  • Capacity: 90 Round – 180mm / 90 Square – 180 x 260mm or 65 x 280mm
  • Capacity: 45 Round – 105mm / 45 Square – 120 x 105mm
  • NW/GW: 180 KG/210 KG

 

 

Request a Quote

MODERN/WAYTRAIN UE-712SB Horizontal Bandsaw

1 Horse-Power, 1 Phase, 120/240 Volt, 60 Hertz – Capacity: 7″ x 12″

SPECIFICATIONS:

  • Type: Belt Driven, Swivel Base
  • Motor: 1 Horse-Power
  • Voltage: 110/240 Volt, 60 Hertz
  • Blade Speed: 39/66/82 MPM (125/215/270 FPM)
  • Blade Size: 19 x 0.9 x 2360mm
  • Capacity: 90 Round – 180mm / 90 Square – 180 x 280mm or 65 x 300mm
  • Capacity: 45 Round – 110mm / 45 Square – 180 x 110mm
  • NW/GW: 130 KG/150 KG

 

Request a Quote

MODERN/WAYTRAIN UE-712CSA Horizontal Bandsaw

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

  • Type: “CE” Standard
  • Motor: 1 Horse-Power 4 Speed with coolant pump
  • Voltage: 110/220 Volt, 1 Phase
  • Blade Speed: Step Pulley 22/33/45/65 MPM
  • Blade Size: 19 x 0.9 x 2360mm
  • Capacity: 90 Round – 180mm / 90 Square – 180 x 280mm or 65 x 300mm
  • Capacity: 45 Round – 110mm / 45 Square – 180 x 110mm
  • NW/GW: 130 KG/150 KG

 

Request a Quote

MODERN/PHOEBUS PBM-GEVS500A Vertical & Horizontal Milling Machine

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

TRAVEL

  • Longitudinal travel – X manual 1120 mm
  • Cross travel – Y manual 380 mm
  • Vertical travel – Z manual 450 mm
  • Longitudinal travel – X Auto 920 mm
  • Cross travel – Y Auto 500 mm
  • Vertical travel – Z Auto 420 mm
Request a Quote

MODERN/MYDAY 3W-26120 Heavy Duty Precision Lathe

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

SPECIFICATIONS:

  • CAPACITIES:
    • SWING OVER BED 26”
    • BED WIDTH 18”
    • SWING OVER CROSS SLIDE 18”
    • SWING OVER GAP 35”
Request a Quote

MODERN/LINMAC WV-270DS Horizontal Bandsaw

Motor inverter controls blade speed, Manual or auto flow control cutting, and dual miter cutting, 0 – 60 (R), 0 – 45 (L)

1 1/2 Horse-Power, 3 Phase, 208 Volt, 60 Hertz

SPECIFICATIONS:

  • Capacity: 90 Round = 227 mm, 90 Square = 220 x 220 mm, Rectangle = 260 x 110 mm
  • Capacity: 45 Round = 150 mm, 90 Square = 145 x 145 mm, Rectangle = 200 x 125 mm
  • Capacity: 60 Round = 90 mm, 90 Square = 85 x 85 mm
  • Capacity: 45 (L) Round = 110 mm, 90 Square = 110 x 110 mm, Rectangle = 160 x 110 mm
Request a Quote

MODERN/LINMAC VH-1010-6E Hydraulic Box & Pan Brake

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

5HP 3PH 220V 60HZ Cap: 120”x 10ga (3.5mm), (ETL Certified)

SPECIFICATIONS: 

  • Bending Capacities:
    • Bending Length: 3048 mm / 120”
    • Mild Steel: 3.5 mm (10 ga)
    • Stainless Steel: 2.5 mm (12 ga)
  • Bending Angle: 0 – 135”
  • Beam Adjustment: 25 mm (1”)
  • Min Reverse Bend: 20 mm (13/16”)
  • Motor (HP): 5 HP 220/440/575 Volt 3 phase
  • Packing Size:  400 x 1100 x 7660 mm
  • Packing Weight: 3480 kgs
  • Hydraulic Clamping
  • Bend Angle Settings
Request a Quote

MODERN/LINMAC V-812-6 Box & Pan Brake

The brand-name MODERN is synonymous to quality and performance. For over 20 years, MODERN machines have been sold, tried and tested in North America. We call that SUCCESS!

Cap. 96” (2500mm) x12ga

SPECIFICATIONS:

  • 97″ Overall Bending Length
  • 12 ga Capacity Mild Steel
  • 16 gauge Capacity Stainless Steel
  • Beam adjustment 1”
  • 5/16” Minimum Reverse Bend
  • 3,630 Lbs. Approximate Shipping Weight
Request a Quote